Yesterday, I was sitting on the couch and I noticed my brother sitting in the backyard on an old porch chair enjoying the outdoors. I thought to myself, I bet that i could make a chair a little better that that one.
Well, 24 hours later and 8 hours of sweat in the 100° heat and I built something that my brother and his wife can enjoy in the backyard by the campfire!
I’ll make a another post on how I made it and when I have it sanded/finished!
For now, here is a list of what I used:
Tools Needed:
- Circular Saw
- Jig Saw
- Drill
- Tape Measure / Ruler / Pencil
Optional:
- Orbital Sander
- Square
- Clamps
Parts Supplies:
- 2″ Deck Screws
- 2 1/2″ Deck Screws
- 3″ Deck Screws
- Drill Bit (For Pilot Holes)
- 120/220 Sandpaper (Blocks are nice)
Wood Supplies:
- 2″ x 6″ x 96″ (8ft) | Quantity 1
- 1″ x 6″ x 96″ (8ft) | Quantity 2
- 2″ x 4″ x 96″ (8ft) | Quantity 5
- 1″ x 4″ x 96″ (8ft) | Quantity 6
